Freight consolidation: how consolidated freight saves money
Freight consolidation turns many small shipments into one load. Instead of six pallets going LTL on Monday, eight on Tuesday and eight on Wednesday, a shipper or a consolidator holds them for a day, fills a trailer and sends it once. The savings come from paying for one truck instead of three networks' worth of handling. This guide explains how consolidated freight shipping works, the pool distribution model, what it does to cost, and the risks. We dispatch carriers and don't consolidate or ship freight; on the carrier side, consolidated loads are the multi-stop and pool runs our desk books every week.
How freight consolidation works
The figure starts with three shippers' freight on one 53 ft van: 6 pallets from Shipper A, 8 from Shipper B and 8 from Shipper C, all headed to the same metro area. Change the count or the pallet size and watch the linear feet move.
Fits: 44.0 of 52.5 ft used.
Floor math only. Check weight, axle limits and how the freight must be loaded.
Twenty-two standard pallets, loaded two across, take most of the floor of a 53 ft van. Shipped separately, each of those shipments would be priced as LTL by class, cross one or more terminals, and pay its own minimum charge. Combined, they share one linehaul. The pallet sizes are EXAMPLE values; your freight and the trailer's inside dimensions decide what really fits. The trailer cube and load volume calculator checks fit by volume as well as floor.
Consolidation happens in three common ways:
- One shipper, many orders. A manufacturer holds a day's orders to one region and ships them as one truckload, with several delivery stops.
- Many suppliers, one buyer. A retailer's suppliers send freight to a consolidation warehouse, which builds full loads into the retailer's distribution center. This is common for inbound freight.
- Many shippers, one lane. A consolidator or broker combines unrelated shippers' freight going the same direction, sometimes called groupage freight in international shipping.
Pool distribution: consolidate, then split
Pool distribution is consolidation in reverse at the far end. A full truckload carries many orders to a cross-dock or pool point near the customers. There the load is broken down, and local trucks deliver each order. The long haul is priced as a truckload; only the last miles are local. Retail stores, restaurants and dealer networks often receive freight this way. The split happens at a warehouse or freight terminal (coming soon), and if the freight moves between trailers or modes along the way, that step is called transload freight (coming soon).
What consolidation does to freight cost
EXAMPLE: three LTL shipments vs one consolidated loadExample
- SEPARATE3 LTL shipments at an EXAMPLE $520, $610 and $640: $1,770
- CONSOLIDATEDOne truckload at an EXAMPLE $1,250 plus $180 handling at the warehouse: $1,430
- SAVED$340 on paper, about 19%
- COST OF ITShipper A's freight waited a day for the load to build
These are EXAMPLE figures, not market rates. Real savings depend on how full the truck gets, the handling and storage charges, and the lane. Consolidation also changes how the cost is shared: a consolidator usually splits the load cost by pallet, weight or floor space, and some quote each shipper a flat rate per pallet. Our guide to freight shipping cost explains each line, and LTL freight covers the LTL side of the comparison.
Freight consolidation services and companies
Shippers can consolidate in-house, use a warehouse that offers consolidation, or hire a freight consolidator or broker that builds loads from many customers. We don't name or rank freight consolidation companies, because we haven't verified their terms from their own pages. When comparing them, ask about the cutoff times for each departure, how often loads leave, handling and storage fees, how costs are split, how shipments are tracked through the cross-dock, and who is liable for loss at each step. Warehouses that store goods between moves are covered in our freight warehousing (coming soon) guide.
Risks and trade-offs
- Waiting. A load needs time to build. Urgent freight shouldn't wait for it.
- Extra handling. Freight is touched at the consolidation point and again at deconsolidation. Pack it for that.
- Mixed paperwork. Each shipment needs its own bill of lading, labels and count, or receivers sign for the wrong freight.
- Liability gaps. Find out who holds the freight at each step before something goes missing.
Consolidated and multi-stop loads pay only when every stop, its appointment and stop pay are on the rate con. Our dispatchers check that before an offer reaches you, and you approve every load.
Get multi-stop loads that payConsolidated loads from the carrier's side
For a carrier, a consolidated load is often a multi-stop run: several pickups at one warehouse door or several deliveries in one metro. It can pay well, because the shipper is saving money, but each stop takes time. Check the number of stops, the appointment at each, stop pay, and detention terms for every dock, not just the first one. Count pallets at each stop and get each receiver's signature on its own paperwork.
Our dry van dispatch desk works pool runs and multi-stop consolidated loads, puts every stop and its terms on the rate con, and sends the rate confirmation straight to you. For the basics of how freight moves, see what freight is. Carriers who haul seasonal reefer freight, which often moves as mixed loads from more than one shed, can see how we handle it on our produce freight dispatch page.
Ready for consolidated and pool loads that pay for every stop? Send your application, visit the RescueLoad home page, or read more freight guides.