Skip to content
RescueLoad

    LTL freight: how less-than-truckload shipping works

    LTL freight, short for less-than-truckload, is how most palletized shipments under a full trailer move in the US. You pay for the space and weight your freight uses, and the carrier fills the rest of the trailer with other customers' pallets. This guide covers how LTL freight shipping works from pickup to delivery, how freight class and density drive the rate, which accessorials show up on the bill, why transit takes longer than a truckload, and when a partial truckload beats it. We dispatch carriers and don't ship freight or quote LTL; the guide is written so shippers and carriers read the same paperwork the same way.

    What LTL freight means

    A truckload shipper buys the whole trailer. An LTL shipper buys a slice of one. The carrier runs a network of terminals and builds loads from many small shipments, so a 3-pallet order from one shipper might ride beside 20 other shipments headed the same direction.

    That sharing is why LTL works for small freight: you don't pay to move empty floor. It's also why LTL has rules a truckload doesn't. Your freight gets handled several times, so it must be packaged to survive forklifts and stacking. It gets priced against freight from other industries, so it needs a class. And it gets measured and weighed at the terminal, so the numbers on your bill of lading need to be right. For the broader picture of what counts as freight and how it moves, start with our guide to what freight is.

    How LTL freight shipping works, step by step

    1. Booking. The shipper or a broker gives the carrier the lanes, pieces, dimensions, weight, commodity and services, and gets a quote and a pickup.
    2. Pickup. A local driver collects the freight, often on a route with several other pickups the same afternoon, and signs the bill of lading.
    3. Origin terminal. The freight is unloaded, scanned, often weighed and measured, then loaded onto a linehaul trailer for its destination or a hub.
    4. Linehaul. Overnight runs move trailers between terminals. Long lanes may pass through one or more break-bulk hubs where freight is sorted again.
    5. Destination terminal. The freight is unloaded and put on a local delivery truck.
    6. Delivery. The driver delivers, the receiver counts and inspects, and both sign the delivery receipt. Any shortage or damage is noted on it at that moment.

    Each handoff is a scan event, which is how LTL tracking works: your PRO number shows where the freight was last scanned, not a live dot on a map. Each handoff is also a chance for damage, which is why packaging matters more in LTL than in a sealed truckload.

    LTL freight rates: what sets the price

    LTL pricing follows a fixed order. Once you know the order, any quote can be checked.

    1. Billed weight in hundredweight (cwt). 1,600 lb is 16 cwt.
    2. Rate per cwt for your freight class and weight break, from the carrier's base tariff.
    3. Weight-break check. Rates drop as weight rises. Just under a break, billing the break weight can cost less.
    4. Discount. Most LTL prices are a negotiated discount off the base tariff, often a large one.
    5. Minimum charge. If the discounted figure falls below it, the minimum applies.
    6. Fuel surcharge, a percentage of the net freight charge, usually tied to a weekly diesel price table.
    7. Accessorials, each priced in the carrier's rules tariff.

    EXAMPLE: 4 pallets, 1,600 lb, one liftgate deliveryExample

    1. SIZE4 pallets, 48 x 40 x 48 in: 53.3 cu ft each, 213.3 cu ft total
    2. DENSITY1,600 lb / 213.3 cu ft = 7.5 lb per cu ft, an estimated class 125
    3. GROSS16 cwt x $80.00 = $1,280.00
    4. NET$1,280.00 less a 72% discount = $358.40, over the minimum
    5. ADDFuel surcharge 28% = $100.35, liftgate $85.00
    6. TOTAL$543.75 before any reclass or delivery surprise

    The rates, discount and surcharge above are EXAMPLE figures, not market rates. Put the numbers from your own quote or tariff into the LTL freight cost estimator and it applies them in this order, including the weight-break check and what a reclass one class higher would cost.

    Freight class and density

    Freight class is a number from 50 to 500, set by the National Motor Freight Classification that the National Motor Freight Traffic Association (NMFTA) publishes. Low classes are dense, sturdy freight that costs less per pound to move; high classes are light, bulky or fragile freight that costs more.

    Since NMFC Docket 2025-1 took effect on July 19, 2025, many more items follow a density scale: weight divided by cubic feet points to a class. In the example above, 7.5 pounds per cubic foot lands in the 6 to 8 band. That number is math you can do yourself. The class is still an estimate until the NMFC item for your product and the carrier's tariff confirm it. Our freight class guide explains the scale and how a reclass happens, and the freight class density calculator does the measuring math.

    Two habits keep LTL freight out of trouble here: measure the shipment as it will ship, pallet and overhang included, and describe the commodity on the bill of lading the way the NMFC item names it.

    LTL accessorials: the charges outside the rate

    Accessorials are the services a plain dock-to-dock move doesn't include. On LTL they're common, and they're priced per shipment in each carrier's rules tariff.

    AccessorialWhen it applies
    Liftgate at pickup or deliveryNo dock at one end, freight lowered from the trailer bed
    Residential deliveryDelivery to a home or a home-based business
    Limited accessSchools, churches, construction sites, farms, storage units and similar sites
    Inside deliveryFreight moved past the door or threshold
    Appointment or notifyReceiver must be called or a delivery window booked
    Reweigh and inspectionCarrier finds a different weight or class than the BOL shows
    Redelivery or storageFirst delivery attempt fails or the receiver can't take it

    Put every service you need on the bill of lading before pickup. A liftgate found at delivery is still billed, usually after a wasted trip, and the shipment can lose a day. For how these charges work across freight types, see our accessorial charges guide.

    LTL transit times and why they run longer

    A truckload goes from dock to dock with one driver or a team. LTL freight waits for its linehaul trailer, rides overnight between terminals, and waits again for a delivery route. Carriers publish service-day maps by origin and destination; a regional lane may deliver next day, while a cross-country lane takes several business days.

    What slows an LTL shipment down is usually on the paperwork side: a missing appointment, a residential address booked as commercial, a liftgate nobody ordered, or a reclass hold at the terminal. Weather and holiday volume add days on top. If a date matters, ask the carrier for its transit estimate in writing and ask about time-definite service, which most carriers sell at a higher price.

    LTL freight carriers and brokers

    Shippers buy LTL two ways. Direct with a carrier means a signed pricing agreement, a discount off that carrier's tariff, and one network for every lane it serves. Through an LTL freight broker means the broker shops several carriers, books the one that fits, and handles billing, which helps when volume is low or lanes vary.

    Either way, the carrier that hauls the freight owns its tariff, its rules and its liability. A broker doesn't change the carrier's limits on claims. Our largest LTL carriers guide covers the national networks and what shippers compare between them, and freight claims explains how loss and damage claims work under 49 U.S.C. 14706.

    LTL, partial truckload and full truckload compared

    LTLVolume LTLPartial truckloadFull truckload
    Typical sizeA few palletsA large share of a trailerPart of a trailer, one shipperThe whole trailer
    How pricedPer cwt by classVolume quote, often by linear feetPer load or linear feetPer mile or per load
    Terminal handlingYes, often more than onceUsually yesUsually noneNone
    Freight class usedYesSometimesRarelyNo
    TransitSlower, network scheduleNetwork scheduleClose to truckloadDirect

    Partial truckload is the option many shippers miss. The shipment rides on one truck, often a 53 ft dry van or a 26 ft box truck, sometimes beside one or two other partials, and comes off at delivery without a terminal in between. For freight that bruises easily or ships in awkward sizes, fewer touches can matter more than a lower per-cwt rate. Our LTL vs FTL trucking guide walks through the decision.

    When LTL freight fits, and when it doesn't

    LTL fits when the shipment is a few pallets, packaged to be handled, not urgent, and going dock to dock or with services you've booked. It fits less well when freight is fragile or high-value, oddly shaped, or large enough that a volume quote or a partial comes close on price with fewer touches. Shipments that can't be stacked take more floor than their weight suggests and often cost more than expected.

    Produce and other temperature-sensitive freight rarely suits a dry LTL network. It usually moves in reefers as full or partial loads; our produce freight dispatch page explains how our desk books those loads for carriers.

    The carrier's side of LTL-sized freight

    Not every small shipment rides an LTL network. Brokers post partials and volume loads every day, and a carrier with a 26 ft box truck or a dry van can stack two or three on one trip when the stops line up. The money on those loads depends on the same things this guide covers: accurate weight and dimensions on the rate con, the right accessorial terms, and a paper trail at every stop.

    Our dispatchers look for partials and full loads that fit your truck, put the stops and accessorial terms on the rate con, and you approve every load before it's booked.

    Find loads that fit my truck

    Our box truck dispatch desk works partials and full loads for 26 ft trucks, and the rate confirmation always goes straight to you.

    Sources

    • National Motor Freight Traffic Association, NMFC Docket 2025-1 Disposition Bulletin, effective July 19, 2025, checked October 2026.
    • 49 U.S.C. 14706 (Carmack Amendment), Cornell Legal Information Institute, checked October 2026.
    • Carrier rules tariffs set accessorial definitions and amounts; check the tariff of the carrier you use.

    Want a dispatcher to look for partials and full loads for your truck? Send your application or start at the RescueLoad home page. More shipping basics are in the freight guides library.

    Questions people ask

    What does LTL freight mean?
    LTL stands for less-than-truckload. It means a shipment too small to fill a trailer, so it rides with other shippers' freight and each shipper pays for its share. The carrier picks it up, sorts it at a terminal, moves it on a linehaul trailer and delivers it from the destination terminal. Price depends on weight, freight class, distance and services.
    What is the difference between LTL and FTL freight?
    FTL, full truckload, buys a whole trailer for one shipper and usually runs straight from pickup to delivery, priced per mile or per load. LTL shares the trailer, crosses one or more terminals and is priced per hundredweight by freight class. LTL costs less for small shipments; FTL is faster and handles freight less once a shipment fills most of a trailer.
    How do I get an LTL freight quote?
    Give the carrier or broker the pickup and delivery ZIP codes, the number of pallets or pieces, the dimensions and weight of each, the commodity and its NMFC item or class, and every service you need, such as a liftgate or residential delivery. Missing or wrong details are the main reason the final bill differs from the quote.
    How are LTL freight rates calculated?
    The carrier takes the billed weight in hundredweight, applies its rate for your class and weight break, takes off any negotiated discount, checks the minimum charge, then adds a fuel surcharge and accessorials. Every number comes from that carrier's tariff and your agreement, which is why two carriers can price the same shipment very differently.
    Do I need an LTL freight broker?
    Not always. Shippers with steady volume often sign directly with LTL carriers for negotiated discounts. A broker helps when you ship occasionally, need to compare several carriers fast, or want one contact for many lanes. A broker arranges the move but doesn't haul it, so the carrier's tariff and claims rules still apply to your shipment.
    What size shipment is too big for LTL?
    There is no single cutoff. Each LTL carrier's rules tariff sets its own weight, piece and linear-foot limits, and larger shipments are usually moved to a volume quote. When freight takes a good share of a trailer's floor, compare a volume LTL quote with a partial truckload, which often moves on one truck without terminal handling.