Skip to content
RescueLoad

    Motor freight tracking: how shipments are tracked by truck

    Motor freight tracking answers one question for everyone on a load: where is it, and will it be on time? How that answer is produced depends on the service. LTL freight is tracked by scans as it crosses terminals. A full truckload is tracked by the truck's location and the driver's updates. This guide explains how each works, what the numbers on the paperwork are for, how check calls and tracking apps fit together, and what goes wrong. We dispatch carriers and don't ship freight, so we see tracking from the side that has to produce it.

    How LTL freight tracking works

    LTL freight moves through a network, so it's tracked the way a parcel is: by scans.

    1. Pickup. The driver signs the bill of lading and the PRO number is attached. That's the first scan.
    2. Origin terminal. The freight is unloaded, scanned, often weighed and measured, and loaded onto a linehaul trailer.
    3. Linehaul and hubs. Each terminal or break-bulk hub it passes scans it in and out.
    4. Out for delivery. The destination terminal scans it onto a local truck.
    5. Delivered. The receiver signs and the delivery receipt is scanned or uploaded.

    Enter the PRO number, bill of lading number or PO on the carrier's site and you see the last scan. Between scans, the freight is on a trailer, so the status won't change for hours. Our guide to LTL freight covers the network those scans follow.

    How truckload tracking works

    A truckload goes straight from shipper to receiver on one truck, so tracking follows the truck. Most brokers now ask the carrier to share location through a tracking app on the driver's phone or an integration with the truck's electronic logging device, set up for that load and turned off after delivery. On top of that, the broker expects updates at each stage of the load.

    EXAMPLE: one truckload's tracking eventsExample

    1. 06:40Arrived at shipper, checked in, app tracking on
    2. 09:15Loaded, BOL signed, seal 774102, rolling
    3. 13:30Location ping: 210 miles out, ETA on schedule
    4. 17:05Check call: traffic at the interchange, ETA moved 40 minutes
    5. 07:00 next dayArrived at receiver, checked in on time
    6. 09:20Empty, POD signed, tracking off

    The times are an EXAMPLE. The pattern matters more: every event is something a broker or shipper can record, and the in and out times at each dock are what any detention claim rests on later. To check whether an ETA you're promising is legal for the driver's hours, use the truck transit time and ETA calculator.

    Check calls vs tracking apps

    A check call is a person telling the broker where the truck is. A tracking app does the same thing automatically. Most brokers want both: the app for location, and a call or message when something changes, such as a long wait at the shipper, a breakdown, weather, or an ETA that slips. An app that shows a truck parked at a receiver for four hours doesn't explain why. The message does, and it puts the detention clock in writing.

    TMS freight tracking: the shipper's and broker's view

    Shippers and brokers handling many loads pull all of this into a transportation management system. TMS freight tracking collects carrier scans for LTL, location from tracking apps or ELD integrations for truckload, and check calls typed in by people, then flags exceptions: a load not picked up on time, a truck that hasn't moved, a delivery past its appointment. The same records later support billing and the freight audit that checks the invoice against what happened. Our freight management system (coming soon) guide covers what a TMS does, and shippers who bid lanes often score carriers on tracking compliance in an RFP (coming soon).

    The numbers that make tracking work

    NumberWho assigns itWhat it tracks
    PRO numberLTL carrierEvery scan of one LTL shipment
    Bill of lading numberShipperThe shipment on the shipper's paperwork
    Load numberBrokerThe load on the rate confirmation and invoice
    PO numberBuyerThe order the receiver will check against
    Seal numberShipperWhether the trailer was opened in transit

    Put the right numbers on every message and document. A check call with the wrong load number is an update nobody can find. For what each document proves, see what freight is and our guide to freight paperwork.

    Tracking reefer and high-value loads

    Some loads need more than a location. A reefer load is also tracked by temperature: the unit records the setpoint and return air, and many brokers and shippers ask for the temperature download at delivery or for a live feed from a trailer monitor. That record settles most disputes over a rejected load, so keep it until the load is paid. High-value freight adds security terms: no stops within a set distance of pickup, attended parking only, seal checks, and more frequent check calls. Those conditions belong on the rate con before you accept, because breaking one can turn a theft into a dispute over who is responsible. Our guide to high-value freight covers the security habits.

    Tracking terms on the rate confirmation

    Read the tracking section of a rate con the way you read the rate. Look for which app or method is required, when it must be turned on, how often check calls are expected, and what happens if tracking drops: some brokers deduct a fee or hold payment until the POD arrives. If the terms ask for something the truck can't do, such as constant tracking through areas with no signal, raise it before you accept, not after a fee shows up on the settlement.

    What goes wrong with freight tracking

    • Tracking turned off or never accepted. Some brokers charge a fee or hold pay when the app isn't kept on; read the rate con.
    • Dead zones and dead phones. Pings stop in rural stretches or when a phone dies. A message on arrival fixes the gap.
    • Stale LTL status. No scan for a day usually means the freight is on a trailer or waiting at a terminal, but ask if it passes the transit date.
    • ETA promises the driver can't keep. An ETA that ignores hours of service turns into a late load.
    • No times at the dock. Without check-in and check-out times, detention can't be billed.

    Our dispatchers make the check calls and broker updates while you drive, keep the dock times that support detention, and you approve every load before it's booked.

    Let a dispatcher handle check calls

    Tracking from the carrier's side

    For a small carrier, tracking is part of the job that doesn't pay directly but costs a lot when it's missed. Brokers remember carriers whose loads they never have to chase. The habits are simple: accept the tracking link before pickup, send a message at every stage, report delays the moment you know, and record dock times. Drivers who do this from the cab while driving shouldn't; it's the work a dispatcher takes over.

    Our dispatch process page shows how our desk handles check calls and broker updates from booking to POD, and the rate confirmation still goes straight to you. Carriers running seasonal reefer freight can see how we keep shed times and temperatures on record on our produce freight dispatch page.

    Sources

    • Tracking practices described here reflect common broker and carrier terms; the rate confirmation or broker agreement for each load sets the actual tracking requirements.
    • Times and events on this page are EXAMPLE values.

    Want check calls handled while you drive? Apply as an owner-operator, visit the RescueLoad home page, or read more freight guides.

    Questions people ask

    How do I track a motor freight shipment?
    For LTL, enter the PRO number, the bill of lading number or the PO on the carrier's tracking page; you get the last scan at a terminal or on a delivery truck. For a truckload, ask the carrier or broker for the tracking link, often from an app the driver accepts, or for check-call updates. The bill of lading has the numbers you need.
    What is a PRO number in freight tracking?
    A PRO number is the tracking number an LTL carrier assigns to a shipment, usually on a sticker or label on the bill of lading and on the freight. It ties every scan, from pickup through each terminal to delivery, to your shipment. Truckload carriers and brokers more often track by load number, BOL number or PO.
    What is TMS freight tracking?
    TMS freight tracking means a transportation management system collecting status for every shipment in one place: carrier scans, location pings from tracking apps or ELD integrations, and check-call updates entered by people. Shippers and brokers use it to see exceptions, update customers and match the delivery record to the invoice. The data still comes from the carrier and driver.
    What is a check call in trucking?
    A check call is a status update from the carrier to the broker or shipper during a load: arrival at pickup, loaded and rolling, a location and ETA during transit, arrival at delivery, and empty. Many brokers now take automatic location from a tracking app instead, but they still expect a call or message when something changes, like a delay.
    Do carriers have to share their truck's location?
    No federal rule makes a carrier share live location with a broker or shipper. Electronic logging devices record hours of service for safety rules; sharing location is a business choice, usually a condition in the rate confirmation or broker agreement. Read the tracking terms before you accept, because some brokers withhold pay or charge a fee when tracking isn't kept on.